skip to main text

Copying Originals

This section describes how to load originals and copy them to plain paper.

  1. Open the front cover.

  2. Pull out the cassette until it stops.

  3. Slide the paper guides (A) all the way out.

  4. Load paper vertically WITH THE PRINT SIDE FACING DOWN.

    Push the paper stack all the way to the back of the cassette.

  5. Align the paper guides with the paper width.

  6. Push the cassette back until the arrow () is aligned with the arrow ().

    After pushing the cassette back, the paper information registration screen is displayed on the touch screen.

  7. Select the size and type of the loaded paper in the cassette at Page size and Type, then tap OK.

    If a message is displayed on the screen, follow the directions in the message to complete registration.

  8. Extend the paper support (B).

  9. Open the output tray extension (C).

  10. Open the paper output tray (D) gently.

  11. Extend the paper output support (E).

  12. Press the HOME button (F).

  13. Tap Copy (G).

  14. Open the document cover (H).

  15. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (I).

  16. Close the document cover.

  17. Confirm the paper settings, then press the Black button or Color button (J).

Important

  • Do not open the document cover until copying is complete.

Note

  • Your machine is equipped with many other convenient copy features.